Section 3
-
Controls and Indicators
3
-
16
31211476
Operator Presence
Note:
Operator Presence works in conjunction with the seat belt sensor. See “Seat Belt
18.
The operator seat (
1
) is equipped with an operator presence system. Transmission is
disabled and joystick (
4
) movements are locked if operator is not present. If the system
detects a loss of pressure during operation, after a three second delay one of the
following will occur:
1. With the park brake (
2
) engaged or disengaged and transmission in neutral (
3
):
• Joystick (
4
) movements are locked. (Continuous Auxiliary function permitted).
• Upon returning to seated position, joystick (
4
) movements are unlocked.
2. With the park brake (
2
) disengaged and transmission in forward or reverse (
3
):
• Joystick (
4
) movements are locked and transmission shifts to neutral.
• Upon returning to seated position, joystick (
4
) movements are unlocked. Return
transmission to neutral to allow system to reset prior to reengaging forward or
reverse travel.
ON0740
1
3
2
4
Содержание Skytrak 3013
