JLG LIFTLUX 210-25, Руководство по эксплуатации и безопасности

Страница: 20 / 84

SECTION 1 - SAFETY PRECAUTIONS
1-10 – JLG Lift – 3121303
qualified person and must be followed to ensure that the
machine is safe.
Maintenance Hazards
• Shut off power to all controls and ensure that all operating
systems are secured from inadvertent motion prior to per-
forming any adjustments or repairs.
• Never work under an elevated platform until it has been
fully lowered to the full down position, if possible, or other-
wise supported and restrained from movement with
appropriate safety props, blocking, or overhead supports.
• Always relieve hydraulic pressure from all hydraulic cir-
cuits before loosening or removing hydraulic compo-
nents.
• Always disconnect batteries when servicing electrical
components or when performing welding on the machine.
• Shut down the engine (if equipped) while fuel tanks are
being filled.
• Ensure replacement parts or components are identical or
equivalent to original parts or components.
• Never attempt to move heavy parts without the aid of a
mechanical device. Do not allow heavy objects to rest in
an unstable position. Ensure adequate support is pro-
vided when raising components of the machine.
• Remove all rings, watches, and jewelry when performing
any maintenance. Do not wear loose fitting clothing or
long hair unrestrained which may become caught or
entangled in equipment.
• Use only clean approved non-flammable cleaing solvents.
• Never alter, remove, or substitute any items such as coun-
terweights, tires, batteries, platforms or other items that
may reduce or affect the overall weight or stability of the
machine.
• Reference the Service and Maintenance Manual for the
weights of critical stability items.
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM
SHALL BE MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE
MANUFACTURER.
Battery Hazards
• Always disconnect batteries when servicing electrical
components or when performing welding on the machine.
• Do not allow smoking, open flame, or sparks near battery
during charging or servicing.
• Do not contact tools or other metal objects across the bat-
tery terminals.