SECTION 6 - ACCESSORIES
6-2
31215027
6.1
FALL ARREST PLATFORM
NOTE:
Refer to JLG External Fall Arrest System manual (P/N-3128935)
for more detailed information.
The external fall arrest system is designed to provide a lanyard
attach point while allowing the operator to access areas outside
the platform. Exit/Enter the platform through the gate area only.
The system is designed for use by one person.
Personnel must use fall protection at all times. A full body harness
is required with lanyard not to exceed 6 ft. (1.8 M) in length, that
limits the maximum arrest force to 900 lb (408 kg) for the trans
-
fastener type and 1350 lb (612 kg) for the shuttle type fall arrest
system.
DO NOT OPERATE ANY MACHINE FUNCTIONS WHILE OUTSIDE OF PLATFORM. BE
CAREFUL WHEN ENTERING/EXITING THE PLATFORM AT ELEVATION.
6.2
SOFT TOUCH
A padding kit is mounted to the platform rails and to a frame sus
-
pended below the platform. Limit switches deactivate platform
functions when the padded framework contacts an adjacent
structure. A button on the platform console allows override of the
system.
To
order
go
to
Discount-Equipment.com
