SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-12
31215027
Platform Control Indicator Panel
(See Figure 3-3., Platform Control Indicator Panel)
1.
Battery Charge Level Indicator
Indicates the state-of-charge of the battery
pack.
2.
System Distress Indicator
The light indicates the JLG Control System has
detected an abnormal condition and a Diag
-
nostic Trouble Code has been set in the system
memory. Refer to the Service Manual for instructions con
-
cerning the trouble codes and the trouble code retrieval.
3.
Drive Orientation Indicator
When the boom is swung beyond the rear
drive tires or further in either direction, the
Drive Orientation indicator will illuminate
when the drive function is selected. This is a signal for the
operator to verify that the drive control is being operated in
the proper direction (i.e. controls reversed situations).
4.
Capacity Zone Indicator
Indicates the platform capacity zone for the
current position of the platform. Restricted
capacities are permitted at restricted platform
positions (shorter boom lengths and higher
boom angles).
5.
Tilt Warning Light and Alarm
This red illuminator indicates the chassis is on
a slope. If the boom is above horizontal and
the machine is on a slope, the tilt alarm warn
-
ing light will illuminate, an alarm will sound, available func
-
tions are placed in Creep speed, and drive is cut out in the
direction of travel. Drive in the opposite direction may be
allowed under certain conditions.
100%
75%
50%
25%
0%
!
!
Tilt Angle
Specification
3°
EC600SJP/H600SJP - All Market
4°
EC600SJ/H600SJ - All Markets
To
order
go
to
Discount-Equipment.com
