JLG E400A Narrow, Руководство по эксплуатации и безопасности

Страница: 43 / 132

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-2 3121716
Ground Control Console
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
(See Figure 3-1.)
NOTE: When machine is shut down the Platform/Ground Select switch
and Emergency Stop must be positioned to Off.
NOTE: The Function Enable switch must be held down in order to oper-
ate Telescope, Lower Lift, Swing, Main Lift, Jib Lift, Jib Swing,
Platform Level Override, and Platform Rotate functions.
1. System Distress Indicator (If Equipped)
The system distress indicator lights to sig-
nify an abnormal condition for the genera-
tor engine (high oil temperature or low oil
pressure) or, on electric machines, an elec-
trical system fault.
NOTE: The engine will automatically shut down under the following
conditions:
High Oil Temperature
Low Oil Pressure
Engine Overspeed
Overvoltage
2. Platform Overload (If equipped)
Indicates the platform has been overloaded.
3. Generator/Engine Start Button (If equipped)
The generator/engine start push-button
switch allows the generator to be started
manually to top-off the battery charge. The
generator will start automatically when the
batteries reach a low-charge state and the Generator Enable
switch on the platform console is in the on position.
NOTE: The engine will not start if the batteries are fully charged or if the
Generator Enable switch on the platform console is not in the on
position.
To
order
go
to
Discount-Equipment.com