JLG E300AJ страница 30 Скачать руководство пользователя

Страница: 30 / 150

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

31215000

2-5

Pre-Start Inspection

The Pre-Start Inspection should include each of the following:

1. Cleanliness –

Check all surfaces for leakage (oil, fuel, or bat

tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.

2. Structure

- Inspect the machine structure for dents, dam

age, weld or parent metal cracks or other discrepancies.

3. Decals and Placards

– Check all for cleanliness and legibil

ity. Make sure none of the decals and placards are missing.
Make sure all illegible decals and placards are cleaned or
replaced.

4. Operation and Safety Manuals

– Make sure a copy of the

Operation  and  Safety  Manual,  AEM  Safety  Manual  (ANSI
markets  only),  and  ANSI  Manual  of  Responsibilities  (ANSI
markets  only)  is  enclosed  in  the  weather  resistant  storage
container.

5. Walk-Around Inspection

– Perform as instructed.

6. Battery –

Charge as required.

7. Hydraulic Oil

– Check the hydraulic oil level. Ensure hydrau

lic oil is added as required.

8. Accessories/Attachments

- Refer to the Accessories section

in this manual or accessory installed upon the machine for
specific inspection, operation, and maintenance instruc

tions.

9. Function Check

– Once the Walk-Around Inspection is com

plete, perform a functional check of all systems in an area
free of overhead and ground level obstructions. Refer to Sec

tion 4 for more specific operating instructions.

10. Platform Gate

–

Keep gate and surrounding area clean and

unobstructed. Verify the gate closes properly and is not bent

or damaged. Keep gate closed at all times except when

entering/exiting the platform and loading/unloading mate

rials.

11. Lanyard Attach Points

–

During operation, occupants in the

platform must wear a full body harness with a lanyard

attached to an authorized lanyard anchorage point. Attach

only one (1) lanyard per lanyard anchorage point.

IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI

ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.

Parent Metal Crack

Weld Crack

order

Discount-Equipment.com

Содержание E300AJ























































































































































Результаты поиска

Содержание E300AJ

Отзывы:

Похожие инструкции для E300AJ

Бренды по названию

Популярные бренды

JLG E300AJ, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание E300AJ

Отзывы:

Похожие инструкции для E300AJ

Бренды по названию

Популярные бренды