SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
31215000
7-1
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.1
INTRODUCTION
This section of the manual provides additional necessary infor
-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa
-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual.......................................... 31215001
Illustrated Parts Manual ............................................................. 31215002
7.2
OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 7-1. Operating specifications - E300AJ
Capacity: Unrestricted: ANSI
500 lb. (227 kg)
Capacity: Unrestricted: CE & Australia
500 lb. (230 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-1.
25%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-1.
5°
Drive Speed
Maximum
Reduced
Elevated
4.5 mph (7.2 km/h)
2.7 mph (4.3 km/h)
0.3 mph (0.48 km/h)
Gross Machine Weight - Approximate
15060
lb. (6831 kg)
Ground Bearing Pressure - Maximum
170 psi (11.95 kg/cm
2
)
To
order go
to
