JLG 530LRT, Руководство по обслуживанию и ремонту

Страница: 218 / 262

SECTION 5 - JLG CONTROL SYSTEM
5-22 3121781
EEPROM Reset
This procedure clears all the machine's calibrations and
returns the machine personalities and set-up to default
settings. After Reset EEPROM, all calibration procedures
will need to be completed. Use this service mode when:
a machine is having multiple issues and clearing the
EEPROM may help to fix the problem; a service techni-
cian wants to clear all machine calibrations and return
the machine to default settings; or a module is moved
from one machine to another and must be cleared and
returned to default.
1. Using the Analyzer, navigate to SERVICE MODE >
EEPROM RESET.
2. Input the pass code 35470 and select Enter.
3. Select Enter to activate EEPROM Reset.
4. Analyzer will display COMPLETE.
5. All settings will be reset. Select Escape to leave
menu.
Allow Drive
This mode allows a service technician to drive the
machine when an active DTC prevents normal drive
functionality. Before initiating this service mode, the ser-
vice technician must verify the platform is stowed and
the leveling jacks are retracted before drive function will
be enabled. Drive speed will only be allowed at elevated
speed.
1. Using the Analyzer, navigate to SERVICE MODE >
ALLOW DRIVE.
2. Input the pass code 82221 and select Enter.
3. The Analyzer will display ALLOW DRIVE? Select Enter
for YES.
4. The Analyzer will display PLATFORM STOWED? Select
Enter.
5. The Analyzer will display L/J RETRACTED? Select
Enter.
6. The analyzer will display RETRCT ALLOWED. Select
Escape to leave menu.
Allow Leveling Jack Retract
This mode allows a service technician to retract the lev-
eling jacks when an active DTC prevents normal leveling
jack functionality. Before initiating this service mode,
the service technician must verify the platform is
stowed before the leveling jacks can be retracted.
1. Using the Analyzer, navigate to SERVICE MODE >
ALLOW LJ RETRCT.
2. Input the pass code 54749 and select Enter.
3. The Analyzer will display ALLOW LJ RETRCT? Select
Enter.
4. The Analyzer will display PLATFORM STOWED? Select
Enter.
5. The analyzer will display RETRCT ALLOWED. Select
Escape to leave menu.