JLG 340AJ, Руководство по обслуживанию и ремонту

Страница: 217 / 370

SECTION 5 - HYDRAULICS
3121259 – JLG Lift – 5-57
Fastener Size and Torque Chart
Plug Size and Torque Chart
Table 5-8. Fastener Size and Torque Chart
Item Fastener Wrench size Torque
D015 Neutral adjust screw 4 mm internal hex NA
D050 Coil mounting bolt 4 mm internal hex 8 Nm [9 ft.lbs.]
D060 Neutral adjust locking nut 13 mm 10 Nm [7 ft.lbs.]
D250 Electric control mounting bolt 5 mm internal hex 13 Nm [10 ft.lbs.]
E350 Servo cylinder locking bolt Servo cylinder locking bolt 14.5 Nm [11 ft.lbs.]
K350Apad Shipping cover mounting bolt 17mm 48 Nm [35 ft.lbs.]
K350 Bpad Shipping cover mounting bolt 18mm 77 Nm [58 ft.lbs.]
K400 Rear cover/aux pad mounting bolt 8 mm internal hex 92 Nm [68 ft.lbs.]
L010 Pressure limiter adjust screw 8 mm NA
L300/L400 Pressure limiter cartridge 14mm 30 Nm [22 ft.lbs.]
L024 Pressure limiter locking nut 14mm 20 Nm [15 ft.lbs.]
L100/L200 High pressure relief valve 22 mm 70 Nm [52 ft.lbs.]
V10 Charge pressure cartridge 22 mm 52 Nm [38 ft.lbs.]
V020 Charge pressure adjusting screw 4 mm internal hex NA
V022 Charge pressure locking nut 13mm 12 Nm[9 ft.lbs.]
Table 5-9. Plug Size and Torque Chart
Item O-ring plug Wrench size Torque
B015 7/16-20 3/16 in internal hex 19 Nm [14 ft.lbs.]
B020 1-1/16- 12 9/16 in internal hex 49 Nm [36 ft.lbs.]
D065 7/16-20 3/16 in internal hex 19 Nm [14 ft.lbs.]
G250 9/16-18 7 mm internal hex 22-26 Nm [16-20 ft.lbs.]
G300/G302 9/16-18 UNF 1/4 in internal hex 42 Nm [30 ft.lbs.]