SECTION 1 - SAFETY PRECAUTIONS
31215084
1-3
Workplace Inspection
•
Precautions to avoid all hazards in the work area must be
taken by the user before and during operation of the
machine.
•
Do not operate or raise the platform from a position on
trucks, trailers, railway cars, floating vessels, scaffolds or
other equipment unless the application is approved in writ
-
ing by JLG.
•
Before operation, check work area for overhead hazards
such as electric lines, bridge cranes, and other potential
overhead obstructions.
•
Check operating surfaces for holes, bumps, drop-offs,
obstructions, debris, concealed holes, and other potential
hazards.
•
Check the work area for hazardous locations. Do not oper
-
ate the machine in hazardous environments unless
approved for that purpose by JLG.
•
Ensure that the ground conditions are adequate to support
the maximum tire load indicated on the tire load decals
located on the chassis adjacent to each wheel.
•
This machine can be operated in nominal ambient tem
-
peratures of 0
o
F to 104
o
F (-20
o
C to 40
o
C). Consult JLG to
optimize operation outside of this temperature range.
Machine Inspection
•
Do not operate this machine until the inspections and func
-
tional checks have been performed as specified in Section 2
of this manual.
•
Do not operate this machine until it has been serviced and
maintained according to the maintenance and inspection
requirements as specified in the machine’s Service and
Maintenance Manual.
•
Ensure all safety devices are operating properly. Modifica
-
tion of these devices is a safety violation.
MODIFICATION OR ALTERATION OF
A MEWP SHALL BE MADE ONLY WITH
PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.
•
Do not operate any machine on which the safety or instruc
-
tion placards or decals are missing or illegible.
•
Check the machine for modifications to original compo
-
nents. Ensure that any modifications have been approved
by JLG.
•
Avoid accumulation of debris on platform floor. Keep mud,
oil, grease, and other slippery substances from footwear
and platform floor.
To
order
go
to
Discount-Equipment.com
