SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-26
– JLG Lift –
3121272
3.14 MACHINE LIFTING AND TIE DOWN
Lifting
The machine may be lifted using a fork lift truck. Lift only from
the rear of the machine and only with the platform in the
stowed position. Adjust the width of the
forklift truck, lifting
tines (1)
to properly fit the machine, see Figure 3-17.
The machine can also be lifted using a spreader bar and four
equal length straps or chains capable of supporting the full
gross weight of the machine, see Figure 3-18. Lift only using the
lifting lugs provided at the four corners of the machine. (
See Sec-
tion 5 for machine gross weight)
.
Tie Down
When transporting the machine, the platform must be fully low-
ered in the stowed position with the machine securely tied
down to the truck or trailer deck. There are two tie-down/lift
lugs located at the front and rear of the machine. (See Figure 3-
19.)
1932RS/6RS
3248RS/10RS
Figure 3-17. Fork Lift Pockets - Location
1
1
