SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121272
– JLG Lift –
3-7
BDI LEDs and hour-meter will not be displayed. Also when plat-
form is elevated and the machine is being driven the creep
mode (turtle) is displayed.
Overload Indicator (If Equipped)
- (Item 5 - Figure 3-3.)
Overload Indicator - Indicates the platform has been over-
loaded. An audible alarm will also signal when the platform is
overloaded.
NOTE: CE/Australia/Japan/ANSI Export:
If the Overload Indi-
cator is illuminated, all platform controls are prevented,
unless the platform has been raised less than 9.84 ft. (3m)
then lift down only is permitted. Reduce the weight in the
platform to not exceed the rated workload indicated on
the capacity decal.
Figure 3-4. MDI Indicator
1.
HourMeter, Wrench, Creep Icon
Indicators
2.
Hour-meter/DTC Code Display
3.
System Fault LED Indicator (RED
LED)
4.
0-25% Charge Indicator
(RED AREA)
5.
50% Charge Indicator
(YELLOW AREA)
6.
75% Charge Indicator
(GREEN AREA)
7.
100% Charge Indicator
(GREEN AREA)
1
2
3
7
6
5
4
