JLG 15MSP Series, Руководство по эксплуатации и безопасности

Страница: 12 / 108

SECTION 1 - SAFETY PRECAUTIONS
1-2 – JLG Lift – 3121230
• All operating personnel must be familiar with the emer-
gency controls and emergency operation of the machine as
specified in this manual.
• Read, understand, and obey all applicable employer, local,
and governmental regulations as they pertain to operation
of the machine.
Workplace Inspection
• The operator is to take safety measures to avoid all hazards
in the work area prior to machine operation.
• Do not operate or raise the platform while on trucks, trail-
ers, railway cars, floating vessels, scaffolds or other equip-
ment unless approved in writing by JLG.
• This machine can be operated in temperatures of 0° F to
104° F
(-20° C to 40° C) . Consult JLG for operation outside
this range.
Machine Inspection
• Before machine operation, perform inspections and func-
tional checks. Refer to Section 2 of this manual for detailed
instructions.
• Do not operate this machine until it has been serviced and
maintained according to requirements specified in the Ser-
vice and Maintenance Manual.
• Ensure all safety devices are operating properly. Modifica-
tion of these devices is a safety violation.
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE
MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER
• Do not operate any machine on which the safety or instruc-
tion placards or decals are missing or illegible.
• Avoid any build up of debris on platform floor. Keep mud,
oil, grease, and other slippery substances from footwear
and platform floor.