JLG 1500SJ Скачать руководство пользователя страница 32

Страница: 32 / 214

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

2-4

– JLG Lift –

3121261

Pre-Start Inspection

The Pre-Start Inspection should include each of the following:

Cleanliness –

Check all surfaces for leakage (oil, fuel, or bat-

tery fluid) or foreign objects. Report any leakage to the
proper maintenance personnel.

Structure

- Inspect the machine structure for dents, dam-

age, weld or parent metal cracks or other discrepancies.

Decals and Placards

– Check all for cleanliness and legibil-

ity. Make sure none of the decals and placards are missing.
Make sure all illegible decals and placards are cleaned or
replaced.

Operation and Safety Manuals

– Make sure a copy of the

Operation and Safety Manual, AEM Safety Manual (ANSI
markets only), and ANSI Manual of Responsibilities (ANSI
markets only) is enclosed in the weather resistant storage
container.

“Walk-Around” Inspection

– Refer to Figure 2-4.

Battery –

Charge as required.

Fuel

(Combustion Engine Powered Machines) – Add the

proper fuel as necessary.

Engine Oil Supply

- Ensure the engine oil level is at the Full

mark on the dipstick and the filler cap is secure.

Hydraulic Oil

– Check the hydraulic oil level. Ensure hydrau-

lic oil is added as required.

10.

Accessories/Attachments

- Refer to the Accessories section

in this manual or the accessory installed upon the machine
for specific inspection, operation, and maintenance instruc-
tions.

Parent Metal Crack

Weld Crack

Содержание 1500SJ























































































































































































































Результаты поиска

Содержание 1500SJ

Отзывы:

Бренды по названию

Популярные бренды

JLG 1500SJ, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание 1500SJ

Отзывы:

Бренды по названию

Популярные бренды