JLG 1500AJP, Руководство по эксплуатации и безопасности, Страница: 168 / 203

SECTION 7 - ACCESSORIES
7-12 3121734
7.6 SKYCUTTER
The Plasma Cutter will be capable of cutting up to a thickness of
3/8 in. metal and is capable of producing 27A at 92 VDC @ 35%
duty cycle or 14A at 92 VDC @ 60% duty cycle.
Accessory Ratings
Table 7-5. Plasma Cutter Characteristics
Spec. Rated Output
Amperes Input @
Rated Output, 60
Hz, Single-Phase
KVA/KW Plasma Gas
Plasma Gas Flow/
Pressure
Rated Cutting
Capacity
@ 10 IPM
Max. OCV
120 Volts
±10% (20A)
27 A @ 91 VDC @ 20%
Duty Cycle
28.8 max;
0.30*
3.4 KVA
3.2 KW
Air or Nitrogen Only @ 90 -
120 PSI
(621 - 827 kPa)
4.5 CFM
(129 L/Min)
@ 60 PSI
(414 kpa)
3/8 in.
(10 mm)
400 VDC
120 Volts
±10% (15A)
20 A @ 88 VDC @ 35%
Duty Cycle
20.6 max;
0.30*
2.5 KVA
2.3 KW
240 Volts
±10% (27A)
27 A @ 91 VDC @ 35%
Duty Cycle
13.9 max;
0.13*
3.3 KVA
3.0 KW
* While idling.
To
order go
to
Discount-Equipment.com