JLA D3030 Скачать руководство пользователя страница 6

Страница: 6 / 46

JLA Limited

113161-14

SECTION I

SAFETY PRECAUTIONS

WARNING:

For your safety, the information in this manual

must be

followed to minimize the risk

of fire or explosion or to prevent property damage, personal injury, or loss of life.

WARNING: The dryer

must never be

operated with any of the back guards, outer tops, or

service panels removed

PERSONAL INJURY OR FIRE COULD RESULT

DO NOT

store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

DO NOT

spray aerosols in the vicinity of this appliance while it is in operation.

3. Purchaser/user should consult the local gas supplier for proper instructions to be followed in the event the user

smells gas. The instructions

should be

posted in a prominent location.

4. WHAT TO DO IF YOU SMELL GAS:

DO NOT

try to light any appliance.

DO NOT

touch any electrical switch.

DO NOT

use any phone in your building.

d. Clear the room, building, or area of

ALL

occupants.

e. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

f. If you

cannot

reach your gas supplier, call the fire department.

5. Installation and service

must be

performed by a qualified installer, service agency, or gas supplier.

6. Dryer(s)

must be

exhausted to the outdoors.

7. Although

JLA

produces a very versatile dryer, there are some articles that, due to fabric composition or

cleaning method,

should not be

dried in it.

WARNING:

Dry only water washed fabrics.

DO NOT

dry articles spotted or washed in dry

cleaning solvents, a combustible detergent, industrial chemicals, or “all purpose”
cleaner.

EXPLOSION COULD RESULT

WARNING:

DO NOT

dry rags or articles coated or contaminated with gasoline, kerosene, oil,

paint, or wax.

EXPLOSION COULD RESULT

WARNING:

DO NOT

dry mop heads. Contamination by wax or flammable solvents will create a

fire hazard.

Содержание D3030















































Результаты поиска

Содержание D3030

Отзывы:

Похожие инструкции для D3030

Бренды по названию

Популярные бренды

JLA D3030, Руководство по установке

Результаты поиска

Содержание D3030

Отзывы:

Похожие инструкции для D3030

Бренды по названию

Популярные бренды