JL Audio StealthMod SMS-B-X5E70 Скачать руководство пользователя страница 1

I N S T A L L A T I O N   G U I D E 

for the 

SMS-B-X5E70 

SKU# 94518

2007 - Up   

Thank you for choosing a JL Audio StealthMod

®

 for your automotive sound system. With 

proper installation, your new vehicle-specific enclosed subwoofer system will deliver 

years of listening pleasure.

We strongly recommend that you have your new StealthMod

®

 system installed by your 

authorized JL Audio dealer. The installation professionals employed by your dealer have 

the necessary tools and experience to disassemble and reassemble your vehicle properly.  

Also, keep in mind that your warranty coverage extends to 2 years if your system is 

installed or approved by your authorized JL Audio dealer. If you prefer to perform your 

own installation, please read this installation guide completely  

before beginning the process.

  

If you choose to perform the installation yourself, it is absolutely vital that the 

StealthMod

®

 system be properly mounted to the vehicle according to these 

instructions.  Failure to mount the enclosure properly presents two problems:  
1) The sub-bass performance will suffer due to the movement of the enclosure 

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision 

or sudden deceleration.

S T E P   1

Roll down the window and open the passenger door.

Continued on Next Page 

S T E P   2

Carefully pry up on the trim piece around the release handle 
and remove it from the vehicle.

S T E P   3

Remove the screw behind the panel.

SMS-B-X570  INSTR_SKU# 11339 

INSTALLATION  

D I F F I C U L T Y :

5

5

OUT   

OF

ESTIMATED TIME:

      4-5 HOURS

StealthMod

®

Содержание StealthMod SMS-B-X5E70









Отзывы: