I n s t a l l a t I o n G u I d e
for the
SB-H-FIT/10w3v3
sKu#94433
2007 plus
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. Please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
s t e P 1
Place stealthbox in the trunk near its mounting location.
Take the supplied 3/8 - 16 x 1 1/2” Hex Head Bolt and
threaded into box leaving about 1/2” exposed.
Continued on Next Page
s t e P 2
Place wax square in the designated position. Place the box in
the proper position and press lightly, this will leave an imprint
on the wax square for proper drilling. Remove the 3/8-16 x 1
1/2” Hex Head Bolt from the Stealthbox®.
s t e P 3
Using a 3/8” drill bit, drill through the panel and the metal
fender well.
*CAUTION*
Before drilling, always make sure that you are not
going to be drilling into any gas lines, brake lines,
transmission lines, electrical wiring, exhaust systems
or anything else that might cause a reduction in
your weekly pay. always wear eye protection when
drilling.
SB-H-FIT/10W3v3 INSTR_SKU# 011282
InstallatIon
d I F F I C u lt Y :
2
5
out
oF
estImated tIme:
1-2 HouRs