Stealthbox
®
I N S T A L L A T I O N G U I D E
SB-D-QDRAM/10W3v3, JL AUDIO, Inc 2018
Page 1
for the
SB-D-QDRAM/10W3v3
SKU# 94049
2002-Up Dodge 1500 Ram Quad Cab &
2003-Up Dodge 2500, 3500 Ram Quad Cab
This Stealthbox is a product which
requires professional installation skills
and tools.
Please read this installation guide thor-
oughly before beginning the project.
It will guide you step by step through
the installation. Several of the steps in
this process may require two people to
accomplish.
It is absolutely vital that the enclo-
sure be properly mounted to the
vehicle according to these instructions.
Failure to mount the enclosure properly
presents two problems: 1) The sub-
bass performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1:
Remove the passenger side metal floor
extension, if equipped.
STEP 2:
Remove the paper backing and place
supplied wax square onto the floor.
The center of wax square needs to measure 5”
from transmission hump.
The rear edge of the wax square is against the
start of the curvature.
STEP 3:
Thread the supplied socket set screw
into the Stealthbox. Leaving 1/2” exposed.
STEP 4:
Place the Stealthbox into the passen-
ger’s side cavity and push down.
STEP 5:
The threaded rod will leave an
impression, onto the was square.
STEP 6:
With a 1/2” drill bit. Drill a hole into the
floor using the imprint in the wax square as guide.
START
HERE
Continued on Next Page
➔
w w w. j l a u d i o . c o m
