Route the speaker cable exiting the enclosure through
the hole in the fixture base, and align the two fixture
halves together.
5
Use the supplied butt connectors to connect the red (+)
and black (-) speaker cable exiting the ETXv3 enclosure
to the speaker cable below the mounting surface. The
green and white wires will not be used in this application
7
Rotate the enclosure to the desired angle, install the
5/16 - 18 x 1-1/4” socket head cap screw and 5/16” lock
washer, and fully tighten.
6
Remove adhesive backing and install the JL Audio logo
badge
(Sport Grille Models Only)
.
8
