Continued on Next Page
SMS-F150-SPRCRW INSTR_SKU# 011341
Page 8 • JL Audio, Inc., 2013
S T E P 3 6
Disconnect the negative battery post connection.
Unclip and remove the trim panel below the power outlet.
S T E P 4 0
Open the console lid and remove the three screws holding
the lid to the console. Remove the lid.
S T E P 3 9
Slide the front seats forward to access the rear mounting
bolts. Remove the bolts.
S T E P 3 4
Slide the four Speed Clips onto the Amplifier Bracket, and
put the bracket back into place. Slide a 1/4” Lock Washer and
a 1/4” Flat Washer over each of three 1/4 - 20 x 1” Bolts, and
secure the Amplifier Bracket to the vehicle with the trhee
assemblies as shown.
S T E P 3 8
Unclip and remove the trim panels at the front of each side
of the console to access the front mounting bolts. Remove
the bolts. On the passenger’s side, unplug the two wiring
harnesses.
S T E P 3 3
Cut a slit in the carpet to allow the amplifier wiring to pass
through.
S T E P 3 7
Unclip and remove the trim panel around the shifter to
access the upper mounting bolts. Remove the bolts.
S T E P 3 5
Mount the Amplifier to the Amplifier Bracket with four #8 x 1”
Pan Head Screws.
