JinkoSolar JKMxxxM-60 Series, Руководство пользователя

Страница: 7 / 24

Rev. C
- 5 -


Only PV modules with the same cell size should be connected in series.

During all transportation situations, please make sure no huge shock for the
vehicle or the modules, as this may damage the module or lead the cell to be
crack.

During all transportation situation, never let the module fall down from the vehicle,
house or hands. This will break the cells of the modules.

Do not clean the glass with chemicals.

Do not disconnect any of the modules when it is under load.
2. Installation
2.1 Installation safety

Always wear protective head gear, insulating gloves and safety shoes (with
rubber soles).

Keep the PV module packed in the carton until installation.

Do not touch the PV module unnecessarily during installation. The glass surface
and the frame may be hot. There is a risk of burns and electric shock.

Do not work in rain, snow or windy conditions.

Due to the risk of electrical shock, do not perform any work if the terminals of the
PV module are wet.

Use insulated tools and do not use wet tools.

When installing PV modules, do not drop any objects (e.g., PV modules or tools).

Make sure flammable gasses are not generated or present near the installation
site.

Insert interconnect connectors fully and correctly. Check all connections.