JinkoSolar JKM***M-60, Руководство пользователя

Страница: 5 / 44

Rev. C
- 3 -
This module has a Class C Fire Rating(Canada)or Module Fire performance type 1 (United
States of America) and must be installed over a roof which has appropriate fire resistance.
Before mounting the module, please consult your local building department to determine
approved roofing materials.
The modules are qualified for application class A, and modules qualified for safety through
UL1703 within this application class are considered to meet the requirements of Safety Class
II.
The Fire rating is Class C in Canada, but the Module Fire performance is type 1 in America
with the specified construction in below table, when used with a listed mounting system that
has been rated as a Class A System when installed with type 1 modules, is suitable to
maintain the System Class A Fire Rating in America.
Module model Specific construction Marking
Group 1~Group 12
Superstrate: 3.2~4.0 mm thick;
EVA: 0.25~0.65 mm thick;
Substrate: 0.3 mm ~ 0.451 mm thick;
Frame: Types “40mm by 20mm” or
“40mm by 35mm” or “700-0218”
Module Fire Performance:
Type 1
1.3 Warnings

PV modules generate DC electrical energy when exposed to sunlight or other light
sources. Active parts of module such as terminals can result in burns, sparks and lethal
shock.

Artificially concentrated sunlight shall not be directed on the module or panel.

Front protective glass is utilized on the module. Broken solar module glass is an electrical
safety hazard (may cause electric shock or fire). These modules cannot be repaired and
should be replaced immediately.

To reduce the risk of electrical shocks or burns, modules may be covered with an opaque
material during installation to avoid injury.

Electric Shock and Burn Hazard

This photovoltaic module produces
electricity when exposed to the sun
Warning