JING JIE UniPBX-2000, Административное руководство

Страница: 99 / 219

Using the System
99
The detail of each parameter is described as below:
Parameter
Name
Description
Blocking Target Incoming call or outgoing call to be screened.
Pilot Number The called number prefix used to be matched. If the
outgoing number prefix is matched the pilot number, the
call might be rejected or accepted based on the "Blocking
Type".
Blocking Time The system allow to have time restricted screening
feature. When you enter the blocking time for a screening
list, this screen will only affected by this certain period.
Blocking Type Whether to block, unblock or privilege access for the pilot
number prefix. When all entries in the same group are set
to "block", it means all call can be passed unless those
listed pilot number. When all entries are set to "unblock",
only those calls matched the entry will able to get through.
If some of entries are set to "block" and some are set to
"unblock", the call matched "blocked" list will be rejected
first and the call matched "unblock" list will able to get
through.
For those entries are set to "privilege access", it will able
to get through when you use "Enable Privilege Access"
access code to turn it on to call and use "Disable Privilege
Access" access code to turn it off.
2.3.2.2 Voice Mail Access
The extension users can access their owned voice mail either by web or phone. To
check voice mail by web, click
EXTENSION -> Extension -> Voice Mail Access
and the following screen will be displayed.