Jimmy Styks Puffer, Руководство пользователя

Страница: 9 / 11

FOR WARRANT Y INFORMATION, PARTS/ACCESSORIES, CALL 1-800-370-0745
OR CONTAC T US THROUGH OUR WEB SITE, WWW.JIMMYST YKS.COM
16
Q U E S T I O N S / CO M M E N TS :
1-800-370-0745
j i m m y s t y k s . c o m
17
SECTION 7
REPAIR KIT CONTENTS & APPLICATION
The PUFFER comes equipped with an
RK1 emergency repair kit for small leaks
and/or tears.
The included kit may not be adequate
for larger tears or along seams. Contact
Jimmy Styks
TM
online at jimmystyks.
com for further assistance.
Prepare the following items:
Latex Gloves (Pair)
Isopropyl Alcohol (Rubbing Alcohol)
Clean Cloth
Cement Applicator (Brush, Popsicle® stick, etc.)
RK1 Emergency Repair Kit Contents
To avoid cement irritation of skin, it
is recommended to wear latex gloves
when attempting to make repairs.
1. Completely deflate PUFFER paddle board.
2. Thoroughly clean the surface around the
leak and the matte side of the PVC/Polyester
patch with rubbing alcohol. Both surfaces
must be free of moisture, oil and debris.
3. Open the cement tube by breaking the
tube seal using the outside of the tube cap.
4. Apply cement carefully and evenly to both
paddle board surface and matte side patch
surface. Avoid contact with skin & eyes.
Avoid breathing cement vapors.
5. Allow cement on both board and patch
to dry to the touch. Once dry, reapply a very
thin layer of cement around the perimeter of
the patch.
6. Once cement on both board and patch
becomes tack-free, apply patch to board
and firmly work out any trapped air bubbles.
7. Allow 8 hours for cement to cure before
inflating paddle board.
REPAIRING LEAKS & TEARS
THE REPAIR KIT
BEFORE YOU START
DIRECTIONS FOR USE
REPAIR KIT CONTAINER CEMENT
PVC/POLYESTER PATCHES X 2
IMPORTANT