Jide CARINO 67, Руководство по установке, использованию и обслуживанию

Страница: 4 / 48

Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 – www.jide.be - info@jide.be
CARINO (EN) February 2020
4
Important
Carino gas inserts are closed-hearth connected with a concentric duct. This concentric duct is made
of two pipes, the outside one brings the combustion air and the inside one expel the combustion
products. There is no direct contact between the heating chamber and the room where the carino
is placed.
-
This insert can never be used without its door, with damaged components or without
connection to a concentric pipe giving to the outside of the building.
- This insert works with natural gas, propane or butane. It is forbidden to use any other kind of
combustible.
- Combustion settings are settled in factory and are sealed. Any handling on the setting pieces
is forbidden and will lead to cancellation of the warranty. For every questions concerning this,
please contact your installer or the manufacturer.
- Internal decoration kit is made of small pieces of vermiculite and of 7 ceramic logs. The
placement of this kit is explained in this manual and must be carefully respected in order to
avoid any operating problem.
- It is strictly forbidden to use other decorations than the ones supplied with the device, under
penalty of dysfunction of the insert and cancellation of the warranty.
- It is strictly forbidden to introduce foreign object inside the device.
- The appliance in function has some burning areas (door, glass, cadre, pipes …). Do not touch
these areas during working and just after extinction of the device, in order to avoid any serious
injury. Hold children, elderly and disabled persons off to avoid contact with the appliance. If
necessary, provide a protection around the fireplace.
- It is strictly forbidden to make the insert work without convection ventilation.
- Keep the remote control out of reach of children.
- It is also forbidden to place objects in a beam of 80 cm in front of the fireplace.
- This device owns two internal thermal securities. If the fireplace has not worked for a long time
and the system is very cold, the first lightning up might be unsuccessful. Two or three tries will
be necessary to succeed. Beyond three tries, contact your installer.
- In order to keep a sufficient signal quality between the two components, do not keep the
remote control at more than 5 meters of the insert without obstacle.
- Read mindfully and entirely the manual before any use.
- When the device is not used during a long period of time, close the gas inlet valve.