15
PARENTAL REMOTE CONTROL
How to pair the parental remote control?
FORWARD
STOP
SPEED DISPLAY LED
RIGHT
BACKWARD SPEED -
SPEED +
LEFT
POWER
1. First confirm that ride-on car power switch has been turned OFF. Open
remote controller battery cover, and install two AAA alkaline type batteries
(do not use lithium type batteries as they can damage remote controller).
4. Remote controller will stay connected with the ride-on car until it
requires battery replacement. If you replace the batteries, you need to
repeat pairing procedure again, by following steps 1-2.
5. When remote controller is not used for a while, it will automatically
enter a sleep mode, LED indicators will turn OFF. If you need to use
remote controller again, simply press POWER the button on the
remote.
2. When the 3 LED indicators on the remote controller start flashing,
turn the ride-on car ON using power switch on dashboard. The LED
indicators on the remote controller will stop flashing after 3 sec,
indicating the successfull pairing with the ride-on car. Close the battery
cover.
Note:
The emergency stop function can only be enabled by using the remote controller.
The car can only be stopped within the effective remote control range. The remote control
range varies with different environments. Usually the control range will be 30 meters.
Please always keep your child in a safe and reachable area to avoid dangerous situations.
