JHCTech KMDA-3820 Скачать руководство пользователя страница 50

Страница: 50 / 87

User’s Manual

3.2 BIOS parameter settings

When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays a

list of the options that are available. A highlight indicates which option is currently selected. Use the

cursor arrow keys to move the highlight to other options. When an option is highlighted, execute the

option by pressing <Enter>.

Some options lead to pop-up dialog boxes that prompt you to verify that you wish to execute that option.

Other options lead to dialog boxes that prompt you for information.

Some options (marked with a triangle

▶

) lead to submenus that enable you to change the values for the

option. Use the cursor arrow keys to scroll through the items in the submenu.

In this manual, default values are enclosed in parenthesis. Submenu items are denoted by a triangle

▶

．

The default BIOS setting for this motherboard apply for most conditions with optimum performance. We

do not suggest users change the default values in the BIOS setup and take no responsibility to any

Содержание KMDA-3820
























































































Результаты поиска

Содержание KMDA-3820

Отзывы:

Бренды по названию

Популярные бренды

JHCTech KMDA-3820, Руководство пользователя

Результаты поиска

Содержание KMDA-3820

Отзывы:

Бренды по названию

Популярные бренды