JHCTech KMDA-3820 Скачать руководство пользователя страница 49

Страница: 49 / 87

User’s Manual

3.1 BIOS Description

BIOS is the communication bridge between hardware and software. How to correctly set the BIOS

parameters is crucial for the system to work stably and whether the system works at its best.

This chapter describes how to change the system settings through the BIOS settings.

Note:

For the purpose of better product maintenance, the manufacture reserves the right to change the

BIOS items presented in this manual. The BIOS setup screens shown in this chapter are for reference only

and may differ from the actual BIOS.

You need to make SETUP settings as follows:

1. An error message appears on the screen during the system self-test and asks for the SETUP setting.

2. You want to change the factory default settings based on customer characteristics.

(But in general, customers are not recommended to set it up. In most cases, using the default value is

already the best setting.)

The BIOS Setup Utility enables you to configure:

•

Hard drives, diskette drives and peripherals

•

Video display type and display options

•

Password protection from unauthorized use

•

Power Management features

3.1.1 Entering the Setup Utility

When you power on the system, BIOS enters the Power-On Self-Test (POST) routines. POST is a series

of built-in diagnostics performed by the BIOS. After the POST routines are completed, Press the “

DEL

”

key to enter BIOS Setup Utility.

Содержание KMDA-3820
























































































Результаты поиска

Содержание KMDA-3820

Отзывы:

Бренды по названию

Популярные бренды

JHCTech KMDA-3820, Руководство пользователя

Результаты поиска

Содержание KMDA-3820

Отзывы:

Бренды по названию

Популярные бренды