JFA Electronicos K600, Инструкция по эксплуатации

Страница: 2 / 14

K600 REMOTE CONTROL - INSTRUCTION MANUAL
DESCRIPTION
The K600 allows you to control by distance¹ the main functions of the
"player" and change music, folder, volume, pause, play and power.
OPERATION
Transmitter unit: Whenever an o key is pressed, an RF (radio frequency)
signal, will be transmitted to the receiving unit.
Receptor unit: The "led action" will light up indicating the presence of the
received signal, and will transmit in IR (infra red) the code corresponding
to the key pressed.
The receiver can operate with two transmitters, to do this, per form steps
1 and 2 of the item “CODING THE CONTROL” for the new transmitter.
IMPORTANTE
The control panel will not work if the coding procedure is not carried out.
To avoid interference, install the receiver in a location where the antennais
close to the panel and at least 50 cm away from the car alarm receiver.
¹For a longer range, install the equipment in a location where the antenna is free and
the most exposed as possible, the distance achieved is 600 meters in open area.