41
The optional settings are: [None]; [Hardware RTS/CTS]; [Software Xon/Xoff].
Data Bits
The default setting is: [8].
*This item may or may not show up, depending on different configuration.
Parity
The default setting is: [None].
*This item may or may not show up, depending on different configuration.
Stop Bits
The default setting is: [1].
*This item may or may not show up, depending on different configuration.
►
PC Health Status
Press [Enter] to view current hardware health status, make further settings in
‘
SmartFAN Configuration
’.
►
SmartFAN Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFAN Configuration
CPUFAN Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, the following sub-items shall appear:
CPUFAN Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN full speed temperature. Fan will run at full
speed when above this pre-set temperature.
CPUFAN Full-Speed Duty
Use this item to set CPUFAN/SYSFAN full-speed duty. Fan will run at full speed
when above this pre-set duty.
CPUFAN Idle-Speed Temperature
Use this item to set CPUFAN /SYSFAN idle speed temperature. Fan will run at idle
speed when below this pre-set temperature.
CPUFAN Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN idle speed duty. Fan will run at idle speed
when below this pre-set duty.
►
USB Configuration
Содержание LI1BV Series
Страница 19: ...14 M2B_PWR1 3 pin M 2 B key Power Select 2 0 pitch M2E_PWR1 3 pin M 2 E key Power Select 2 0 pitch...
Страница 23: ...18 4 SATAPWR1 4 pin SATA HDD Power Out Connector Pin 1 5V GND 12V GND 5 USB3 4 pin USB 2 0 Connector...
Страница 26: ...21 2 FP_AUDIO1 9 pin Line Out MIC In Header 2 0 pitch 3 FP_USB1 9 pin USB 2 0 Port Header 2 0 pitch...
Страница 30: ...25 10 TX RXCOM2 4 pin COM2 Header RS422 RS485 2 0 pitch 11 INVERTER1 6 pin LVDS Inverter Connector 2 0 pitch...