Web Management User Guide
12
6.2 Administrator
Administrator -> Authentication Configuration
Here you can enter a new
Username/Password
and confirm it.
Administrator -> System IP Configuration
There are two ways for the switch to obtain an IP address: Static and DHCP (Dynamic Host
Configuration Protocol).
When using static mode, the
IP address
,
Subnet Mask
and
Gateway
can be manually configured.
When using DHCP mode, the Switch will first look for a DHCP server to provide it with an IP
address (including network mask and default gateway) before using the default or previously
entered settings. By default the IP setting is static mode with IP address as
192.168.0.1
and subnet
mask as
255.255.255.0
Содержание JRL116M-2F-M
