Jetter JX2-IO16, Руководство пользователя

Страница: 55 / 124

JX2-IO16 6.11 Status LEDs
Jetter AG 55
Once the internal logic circuit has been energized, the booting sequence of the JX2-
IO16 module is activated. The status of the booting sequence is displayed through
the LEDs ERR and RUN. For more information on the status please refer to the
following table:
Status LEDs - Booting Sequence
Sequence
status LED Meaning
1a ERR (red) is lit
RUN (green) is lit ERROR: No system bus cable connected to
the BUS IN (X18) interface, or no connection
with the controller.
1b ERR (red) is lit
RUN (green) is off Module has established connection with the
controller and is waiting for communication
start.
2 ERR (red) is off
RUN (green) flashes Establishing communication with the control-
ler.
3 ERR (red) is off
RUN (green) is lit Module is ready for operation