Jetter JVM-507B - HMI, Руководство пользователя

Страница: 63 / 152

Jetter AG 63
JVM-507B Initial commissioning
Creating and configuring a visualization project in JetSym
The programming tool JetSym STX lets you create visualizations for the HMI
JVM-507B. This topic covers the following:
 Creating a project in JetSym STX

Configuring the controller hardware
 Including the visualization library JVER-STX
 Creating a program that can be compiled and transferred to the HMI
The following requirements must be satisfied:
 JetSym has been installed on the PC used.
 JetSym has been licensed (see online help in JetSym).
 The HMI has been connected to the same network as the PC.
 An active Ethernet connection between HMI, and PC has been
established.

Initial commissioning in JetViewSoft has been completed.
To create a new programming project in JetSym, proceed as follows:
Step Action
1 Launch JetSym
2 Open the menu File . Select menu item New .
Result:
The dialog box New opens.
3 Select JetSym STX project as the project type.
4 Enter the project name.
5 Select the path. It is recommended to store project files within a
JetViewSoft project to the folder STX .
Example:
C:\Users\xxx\Documents\JetViewSoftProjects\VehicleType_1000\
Visu\VehicleType_1000\VehicleType_1000_Dashboard\STX
Advantage:
The JetSym project files are located in the same folder as the file
VisualInterface.stxp created by JetViewSoft.
Introduction
Prerequisites
Creating a project