Jetter JVM-507B - HMI, Руководство пользователя

Страница: 58 / 152

58 Jetter AG
6 Initial commissioning
Creating and configuring a visualization project in JetViewSoft
JetViewSoft lets you create visualization files for the JVM-507B and upload
them to the HMI. This topic covers the following:
 Creating a project in JetViewSoft

Defining the project settings.
 Creating visualization files and uploading them to the HMI.
The following prerequisites must be fulfilled:

JetViewSoft must be installed on the PC.
 JetViewSoft must be licensed (see Online Help in JetViewSoft).
 An active Ethernet connection between the PC and the HMI has been set
up.
To create a new project for the HMI in JetViewSoft, proceed as follows:
Step Action
1 Start JetViewSoft
2 Open the File menu. Select menu item New Project .
Result:
The following dialog box opens:
3
Select in
Selected display:
the HMI used. To do so, click on the image of
the corresponding HMI.
4 In Display name , select a program-internal name for the HMI. You can
add one or more HMIs to a project.
5 Select JetView-ER-STX (CE) .
6
In
Project name
, enter the name of the project.
7 If necessary, change the project menu path under Location .
For the sake of clarity, the end of the path name should be
\Visu
.
8 Enter the name of the workspace into Workspace .
Introduction
Prerequisites
Creating a project