Jetter JVM-407B-HMI, Руководство пользователя

Страница: 253 / 300

Jetter AG 253
JVM-407B Automatic copying of controller data
Available commands
In these sections you can specify commands which are then executed by the
Autostart function.
The Autostart function processes the commands in descending order.
Furthermore, this function lets you insert jumps into the processing order. A
jump is defined by the keyword
goto
and a destination. The destination must
be preceded by a colon (:).

A simple jump is defined as follows:
goto
end
{skipped block}
:end

A conditional jump is defined as follows:
if
{condition}
goto
end
{skipped block}
:end
The syntax of these commands is in line with the standard Windows®
command line syntax. For more information on the command syntax refer to
http://msdn.microsoft.com/en-us/library/ee499728%28v=winembedded.60%29
.aspx
A command listing can be found here
Introduction
Processing commands
Available commands