Jetter JM-208-480-OEM, Руководство пользователя, Страница: 35 / 128

JetMove 208-480 5.1 Electrical Specifications
Jetter AG 35
5 Technical Data
5.1 Electrical Specifications
Electrical Specifications
Rated voltage supply • 3-phase direct supply
V
rms
= 3x400/480 V
Voltage asymmetry 2 % max. (voltage
dips 10 ms max. at continuous output)
• 48 ... 62 Hz
(frequency change 2 % / s max.)
Power supply tolerance U
eff
= 340 V ... 528 V (-15 % ... +10 %)
Inrush current limitation <10 A limited to < 500 ms during the
switch-on-sequence
Overload protection For each phase an external overload
protection is required, for example
– Circuit-breaker 16 A C
– Fusable cut-out 16 A M (medium time
lag)
– Motor circuit breaker 16 A
For systems with UL approval use
overload protection devices that are UL
listed (acc. to UL 508)(NKJH) self
protected combination motor controller
(Specification: 480V, 16 A).
The JetMove 208-480 is suitable for use on
a circuit capable of delivering not more
than 50,000 rms symmetrical Ampere, 600
Volt maximum.
Supply cable
Cable size
Material
Temperature class
4 * 1.5 mm
2
(AWG 16)
Copper
> 60 °C
Maximum output voltage of the
motor 850 V
Motor output current at an ambient
temperature of 45 °C Nominal current: I
rms
= 8 A
Peak current for a max. period of 5
minutes:
I
rms
= 16 A
(The duration depends on the temperature
of the heat sink)
See "Note 1!" on page 38.
Continuous output 4.5 kW (6.1 hp)