Jetter JM-105, Руководство пользователя, Страница: 12 / 106

1 Safety Instructions
12 Jetter AG
If the digital servo amplifier JetMove 105 is to be run under operating conditions,
which differ from the conditions mentioned in chapter 3 "Operating Conditions", page
27, the manufacturer must be contacted beforehand.
1.1.3 Personnel Qualification
Depending on the life cycle of the product, the persons involved must possess
different qualifications. These demands have to be met, in order to grant safety in
handling the JetMove 105 at each phase of the product life cycle.
1.1.4 Modifications and Alterations to the
Module
Due to safety reasons, neither opening the digital servo amplifier JetMove 105,
nor carrying out any modifications or alterations to the device and its
functions is allowed.
Any modifications to the servo amplifier JetMove 105 not expressly authorized by the
manufacturer will result in a loss of any liability claims to Jetter AG.
The original parts are specifically designed for the servo amplifier JetMove
105. Parts and equipment from other manufacturers are not tested on our part,
and are, therefore, not released by Jetter AG.
The installation of such parts may impair the safety and the proper functioning of the
digital servo amplifier JetMove 105.
Any liability on the part of Jetter AG for any damages resulting from the use of non-
original parts and equipment is excluded.
Product Life Cycle Minimum Qualification
Transport / Storage: Trained and instructed personnel with knowledge in
handling electrostatic sensitive components.
Mounting / Installation: Specialized personnel with training in electrical
engineering, such as industrial electronics engineer.
Commissioning /
Programming: Trained and instructed experts with profound
knowledge of, and experience with, electrical / drive
engineering, such as electronics engineer for
automation technology.
Operation: Trained, instructed and assigned personnel with
knowledge in operating electronic devices.
Decommissioning: Specialized personnel with training in electrical
engineering, such as industrial electronics
technician.