Servomotor series JHN, JHQ, and JL – User Manual
Product description
Jetter AG
34
3.5 Hardware revision
The hardware revision number is either indicated in the product code (Rev. B) or is also indicated
in the Jetter item number 6xxxxxxx_yy by the last two digits.
Example:
Revision index _00 means revision 0.
Revision index _02 means revision 2.
No revision index also means revision 2, because the first articles in our ERP system were created
without revision index.
For Jetter item numbers of motors without the
_yy
specification, the revision number on the
nameplate is indicated by
-Rxx
.
Example:
JL2 motor from the year 2011 with
R01
.
Due to a change of the connector dimensions by the manufacturer, it was necessary to change
over to revision
R02
for all motors.
The following table shows a comparison of the connector dimensions for revisions R01 and R02:
R01
R02
Motor
connector
M23 x 1 in
version S-X
Height: 39 mm
Height: 41.5 mm
Motor
connector
M40 x 1.5 in
version S-X
Height: 65 mm
Height: 61.7 mm
