Jetter JetWeb JetMove 203-230, Руководство пользователя, Страница: 48 / 90

7 Description of Connections JetWeb
48 Jetter AG
7.2.2 Assignment and specification
Specification of the connector for terminal X62
• 4-pin connector (type PC 4/ 4-ST-7.62)
• Rewirable core cross-section: 0.25 - 4 mm
2
• Bladed screw-driver: 0.6 x 3.5 x 100 mm
2
• Stud torque of terminal blocks: 0.5 Nm - 0.6 Nm
Specification of the motor cable
• Cable size: 4 * 0.75 mm²
• Material: Copper
• Temperature class: 60 °C
• Stripping length of the cores: 6 mm
• Bootlace ferrules are recommended
Cable shielding
• Braided copper shield of 80% coverage
Connection of the motor to the digital servo amplifier JetMove 203-230 has to be
done following the wiring diagram below. (Connection of the brake is optional)
Fig.9: Connection of motor lines
Strain relief
of the
JM203-230
green / yellow
PE
core 1
phase 1
core 2
phase 2
core 3
phase 3
Motor
The shield is extensively
connected with the
metallised connecor
housing
Brake +
Brake -
E L+ R
T
L- In
T
24
V
Br
1
Br
2
24 V
0 V
X 62
Free-wheeling
diode, if not
integrated into the
motor
W2
V2
U2
PE
X10