Jetter JetWeb JetMove 203-230, Руководство пользователя, Страница: 35 / 90

JetMove 203-230 5.1 Electrical Specification
Jetter AG 35
5 Technical Data
5.1 Electrical Specification
Electrical Specification
Voltage of the rated power supply • Direct supply U
eff
= 230 V
Common mode of the voltage 2 % max.
Voltage dips 3 ms max.
• 48 ... 62 Hz
Frequency change 2 % / s max.
Connection type of the voltage
supply
• for a rated motor output of >
1kW, a three-phase connection
is compulsory)
• one-phase: direct (U
eff
= 230V: L to N)
• three-phase: by means of auto- or
isolating transformer
e.g.
in primary circuit: U
eff
= 3 x 400 V.
in secondary circuit: U
eff
= 3 x 230 V
See "Note 1!" on page 37.
Power supply tolerance U
eff
= 195 V ... 265 V (-15 % ... + 15 %)
Inrush current limitation <45 A limited to 10 ms during the switch-on-
sequence
See “Time between deactivating and
activating the mains power supply" on
page 37
Overload protection For each phase an external overload
protection is required, for example
– Circuit breaker 4 A C
– Fuse 4 A M (medium time-lag)
– Motor circuit breaker 4 A
Motor output voltage Three-phase with 380 V typical (480 V
max.)
Motor output current at an ambient
temperature of 45 °C Nominal current: I
eff
= 3 A
Peak current for 30 seconds minimum: I
eff
=
6 A
(The duration depends on the temperature
of the heat sink)
See "Note 2!" on page 37.
Continuous power of motor 0.5 kW
Short-circuit protection, motor side Designed for
• phase to phase
• phase to earth
Motor overload protection See "Motor Protection" on page 39.