Jetter AG
Technical specifications | 5
User Manual – JM-100x-S1
13 / 35
5 Technical specifications
This chapter contains information on electrical and mechanical data as well as
operating data of the JM-100x.
5.1 Dimensions
Fig. 4:
Dimensions
5.2 Enclosure properties and operating conditions
Enclosure
Material
Galvanized steel plate
Degree of protection
IP20
Allowed pollution
Pollution degree 2 to EN 61800-5-1
(To avoid conductive pollution, the de-
vice must be installed in a control cabi-
net to IP54)
Mechanical installation
Screwed to a conductive and grounded
mounting panel
Total weight
0.41 kg
Operating conditions
Mounting orientation
Vertical
Power and motor connector X1 must
point downwards
Clearance
≥ 25 mm above, below, and sidewards
Cooling
Natural convection
Max. installation altitude
1000 m above sea level
Installation altitude > 1000 m on re-
quest
Ambient temperature in operation
0 °C … +40 °C
Relative humidity
5 % … 85 %, non-condensing