Jetter JetMove 208-480, Руководство пользователя, Страница: 51 / 124

JetMove 208-480 7.2 Motor Connection
Jetter AG 49
7.2.2 Assignment and Specifications
Specification of Terminal X62
• 4-pin plug (Typ: Phoenix PC6/4-ST-10,16)
• Allowed conductor size: max. 0.5 ... 6 mm
2
(AWG 20 ... 7)
• Torque: 1.2 ... 1.5 Nm (10.6 ... 13.3 lbf-inch)
• Ambient temperature: 45 °C max.
• Field wiring
Connecting Cable Specifications
• Cable size: min. 4 * 1.5 mm² (AWG 16)
• Material: Copper
• Temperature class: 60 °C
Shielding
• Braided copper shield of 80 % coverage
Connection of the motor to the digital servo amplifier JetMove 208-480 has to be
done following the wiring diagram below. Connecting the brake is optional. In this
case, the wires for the brake have to be at least 300 mm longer than the wires of the
motor.
Fig.: 9: Connection of motor lines
Strain relief
at the
JetMove 2xx
W2
V2
U
2
PE
yellow / green
PE
Core 1
Phase 1
Core 2
Phase 2
Core 3
Phase 3
Motor
Connect the shield with a
metallized connector or
motor housing
Brake +
Brake -
E L+ R
T
L- In
T
24
V
Br
1
Br
2
24 V
0 V
X62
A free-wheeling diode is needed, in
case it has not been integrated in
the motor.
In Jetter motors, free-wheeling
diodes have not been integrated!
Recommended diode type: 1N4002
Note!