Jetter JetMove 208-480, Руководство пользователя, Страница: 13 / 124

JetMove 208-480 1.2 Ensure Your Own Safety
Jetter AG 13
The digital servo amplifier JetMove 208-480 is maintenance-free. Therefore,
absolutely no inspection or maintenance works are required for the operation of the
module.
1.1.6 Disposal
In case of obvious damage or erratic behavior, the servo amplifier must not be used
any more.
The environmental regulations for the respective country apply to disposing of the
digital servo JetMove 208-480 amplifier on the operating company’s premises.
You can disassemble the digital servo amplifier JetMove 208-480 into its main
components by unscrewing it (aluminium heat sink and side plate, steel casing cover,
electronic boards).
1.2 Ensure Your Own Safety
1.2.1 Malfunctions
DANGER
Isolate the digital servo amplifier JetMove 208-480 from the mains, if
maintenance works have to be carried out. By doing so, you will prevent
accidents resulting from electric voltage and moving parts.
Please follow the information given in chapter 1.3 "Residual Dangers",
page 16.
Safety and protective devices, e.g. the barrier and cover of the terminal
box must never be shunted or by-passed.
Dismantled protective equipment, such as the fuses and the thermal motor
circuit-breakers, must be reattached prior to commissioning and checked
for proper functioning.
Before commissioning, the machine manufacturer must carry out a danger
analysis of the respective machine and take adequate measures so that
inadvertent motions will not lead to personal injury and to material
damage.
In the case of malfunctions or other faults, please immediately
separate the digital servo amplifier JetMove 208-480 from the mains.
Please follow the information given in chapter 1.3 "Residual Dangers",
page 16.
Malfunctions or other damages are to be reported to a responsible person
at once.
Secure the digital servo amplifier JetMove 208-480 against misuse or
accidental use.