Jetter JC-120MC, Руководство пользователя

Страница: 414 / 634

414 Jetter AG
10 Programming
Module array and module codes of connected modules
A unique module code is assigned to each module that is connected to the
JX3 system bus. The controller JC-120MC, and the bus node JX3-BN-xxx
enter all modules detected during initialization into the module array.
Modules are entered into the module array in the following order:
 As connected

JX3-PS1 modules are not entered into the module array.
Register Description
R 100002015
Index to module array
R 100002016 Module array
R 100002015 = 0: Number of modules
R 100002015 = 1: Module code of the first module
etc.
The module array is accessed indirectly.
Step Action
1 Enter the number of the module in the module array into R 100002015
Index to Module Array .
2 Read out the module code from R 100002016 Module Array .
Module array
Registers - Overview
Reading the module
array