Jetter JC-120MC, Руководство пользователя

Страница: 275 / 634

Jetter AG 275
JC-120MC Programming
Register
The register numbers to be used are calculated by adding and the
controller-dependent basic register number and the module register number.
Controller/server Basic register number Register numbers
JC-120MC: JetIP/TCP 230000 230000 ... 230002
JC-120MC: STX-Debug 212000 212000 ... 212002
Number of connections
The number of currently established connections can be read from module
register 0.
Module register properties
Values 0 ... 4 (JetIP/TCP server)
0 ... 20 (STX debug server)
Mode
If the maximum number of connections is active, and if the server is to
establish a new connection, module registers 1 and 2 determine the behavior.
Module register properties
Values 0 ... 2
Value after reset 1
Minimum inactivity time
If the maximum number of connections is active, and if the server is to
establish a new connection, module registers 1 and 2 determine the behavior.
Module register properties
Values -1 ... 2,147,483,647 [ms]
Value after reset -1
Register numbers
MR 0
MR 1
MR 2