Jette Jupiter, Руководство пользователя, Страница: 16 / 100

Set-up:
Before you can set up the stroller, please ensure to release the safety lock
(fig.1).
Now pull up the push bar in order to allow the stroller to unfold completely.
The stroller will be fully set up when you hear it click into place (fig.2).
Please ensure to then check all parts and components for being mechanically
secured before placing your child into the stroller.
PLEASE NOTE: in order to prevent the adjustable push bar from being
unintentionally released, please connect the Velcro strips provided on both
sides of the stroller to each other when the frame has been set up (fig.3).
Attaching/detaching the wheels:
In order to attach the wheels, please pull the lock button (one button for
each wheel) up on the axle (fig.4) and snap the wheel onto the axle until you
clearly hear it click into place. Slightly pull the wheels in order to make sure
they are mechanically secured.
Now repeat the steps described above for all remaining wheels.
In order to detach the wheels, please proceed as described in reverse order.
Operation of the breaks:
Push the bar for breaking downwards with your foot, in order to operate the
breaks (fig.5). By pulling upwards, you can release the breaks again (fig.6).
ATTENTION:
When you stop the stroller, always operate the breaks.
Adjusting the footrest:
Press the two buttons on the right and left side (fig. 7) to move the footrest
to the desired position. Press the two buttons under the footrest (fig. 8) to
adjust the length of the footrest.
GB
GB