Management and Monitoring
15
INFORMATION:
For the front and rear view about the UID LEDs, please refer to chapter
2, System Components Overview in the
Upgrade FW:
Restart Storage:
Click the
Restart
button to reboot the system.
TIP:
In dual controller model, restart the system will reboot the controller 1
first, and then controller 2 after 30 seconds.
Shutdown Storage:
Click the
Shutdown
button to shutdown the system.
3.1.1.
Firmware Upgrade
The basic information in the CubeView shows current firmware version and supports
firmware update as well. Please prepare new controller firmware file named “xxxx.lzma” in
local hard drive. Click the
icon to browse and select the firmware file to upgrade. Please
be noted that you must select the *.lzma file for upgrade.
Figure 3-2
Firmware Upgrade File Selection
Содержание 824JXD
Страница 12: ......
Страница 25: ...Getting Started 13 Figure 2 14 About CubeView...
Страница 31: ...Management and Monitoring 19 Figure 3 5 All SAS Ports Access All Drives Configuration...
Страница 33: ...Management and Monitoring 21 Figure 3 7 SAS Ports and Disk Drives Divided into Two Groups Configuration...
