3
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-product. This manual has been
prepared for the owner and operators of a JET AFS-500 air filtration system to promote safety during installation, operation and
maintenance procedures. Please read and understand the information contained in these operating instructions and the
accompanying documents. To obtain maximum life and efficiency from your air cleaner, and to use it safely, read this manual
thoroughly and follow instructions carefully.
…Table of Contents
1. Declaration of conformity
2. Warranty
3. Safety
Authorized use
General safety notes
Remaining hazards
4. Machine specifications
Technical data
Noise emission
Contents of delivery
5. Assembly and start up
Assembly
Installation
Mains connection
6. Machine operation
7. Maintenance and inspection
Changing filters
8. Trouble shooting
9. Available accessories
1. Declaration of conformity
On our own responsibility we hereby
declare that this product complies with
the regulations* listed on page 2.
Designed in consideration with the
standards**.
2. Warranty
The Seller guarantees that the
supplied product is free from material
defects and manufacturing faults. This
warranty does not cover any defects
which are caused, either directly or
indirectly, by incorrect use,
carelessness, accidental damage,
repair, inadequate maintenance or
cleaning and normal wear and tear.
Guarantee and/or warranty claims
must be made within twelve months
from the date of purchase (date of
invoice). Any further claims shall be
excluded.
This warranty includes all guarantee
obligations of the Seller and replaces
all previous declarations and
agreements concerning warranties.
The warranty period is valid for eight
hours of daily use. If this is exceeded,
the warranty period shall be reduced
in proportion to the excess use, but to
no less than three months.
Returning rejected goods requires the
prior express consent of the Seller and
is at the Buyer’s risk and expense.
Further warranty details can be found
in the General Terms and Conditions
(GTC). The GTC can be viewed at
www.jettools.com or can be sent by
post upon request.
The Seller reserves the right to make
changes to the product and
accessories at any time.
3. Safety
3.1 Authorized use
This air cleaner is designed for the
filtration of air borne wood dust only.
Any other application is not permitted
and may be carried out in specific
cases only after consulting with the
manufacturer.
.
The product is not suitable for use in
wet or humid environment.
Don’t use appliance in places with a
risk of explosion.
Don’t use appliance at temperatures
below 0°C.
The proper use also includes
compliance with the operating and
maintenance instructions given in this
manual.
The air cleaner must be operated only
by persons familiar with its operation
and maintenance and who are familiar
with its hazards.
The required minimum age must be
observed.
The air cleaner must only be used in a
technically perfect condition.
Before connecting the air cleaner to
electric power, all safety mechanisms
and covers must be mounted.
In addition to the safety requirements
contained in these operating
instructions and your country’s
applicable regulations, you should
observe the generally recognized
technical rules concerning the dust
collection on woodworking machines.
Any other use exceeds authorization.
In the event of unauthorized use of the
product, the manufacturer renounces
all liability and the responsibility is
transferred exclusively to the operator.
3.2 General safety notes
Read and understand the entire
instruction manual before attempting
assembly or operation of the air
cleaner.
Keep this operating instruction close
by the product, protected from dirt and
humidity, and pass it over to the new
owner if you part with the tool.
No changes to the air cleaner may be
made.
Daily inspect the function and
existence of the safety appliances
before you start the air cleaner.
Do not attempt operation in this case,
protect the air cleaner by unplugging
the power cord.
Always disconnect the air cleaner
from the power source (unplug) before
servicing or changing filters.
Never reach into the machine while it
is operating or running down.
Replace contaminated filters.
Clogged filters will reduce the amount
of air circulation.
During the changing or cleaning of the
filters it’s necessary to use a mask
(mask with filtration).
