Jet 50000915M, Руководство по эксплуатации

Страница: 17 / 48

16
Environmental conditions
BD-11G
Temperature 5 - 35 °C
Humidity 25 - 80 %
Operating material
BD-11G
Feed gear Mobilgear 627 or equivalent oil
Bright steel parts and lubricating
i l
Non-corrosive lubricating oil
Change gears Chain oil (spray box)
2.1 Emissions
The level of noise emitted by the lathe is less than 70 dB(A).
INFORMATION
If the lathe is installed in an area where various machines are in operation, the acoustic influ-
ence (immission) on the operator of the lathe may exceed the legally permitted peak value in the
workplace.
We recommend the use of soundproofing and ear protection.
3. Assembly
INFORMATION
The lathe comes pre-assembled.
3.1 Extent of supply
When the machine is delivered, check immediately that the lathe has not been damaged during
shipping and that all components are included. Also check that no fastening screws have come loose.
Compare the parts supplied with the information on the packaging list.
3.2 Transport
WARNING!
Machine parts falling off forklift trucks or other transport vehicles could cause very seri- ous
or even fatal injuries. Follow the instructions and information on the transport case:
Ь
Centres of gravity
Ь
Suspension points
Ь
Weights
Ь
Means of transport to be used
Ь
Prescribed shipping position
WARNING!
Use of unstable lifting and load-suspension gear that might break under load can cause very serious
injuries or even death.
Check that the lifting and load suspension gear has sufficient load capacity and that it is in perfect
condition. Observe the rules for preventing accidents.
Hold the loads properly.
Never walk under suspended loads!